How Long Does It Take For Behr Paint To Dry?

As a general rule, you can expect to wait 5 hours for Behr paint to dry. However, this is only an average, the actual time it takes will depend on the type of paint you’re using and the conditions in your home or workspace.

For example, if you’re painting on a humid day with a high humidity level, it will take longer for the paint to dry. If you live in an area where temperatures are normally very cold and the temperature is unusually warm during your painting project, then it could take longer as well.

In addition to these factors, there are other things that can affect how long it takes for your paint to dry. The type of surface being painted can make a difference. In addition, whether or not you use a primer before applying the paint itself. The type of primer used will also play into how long it takes for your final coat of paint to dry.

Factors That Affect Behr Paint Drying Time


The higher the temperature, the faster your paint will dry. This is because it takes less time for molecules to move around and react with one another, which is what causes paint to dry.

This is why it’s important to paint in warmer weather, and why you shouldn’t paint outside on a cold day. The lowest temperature you should paint in is about 50 degrees Fahrenheit. If you want to speed up the drying time, turn on your air conditioning or use a fan.


The lower the humidity, the faster your paint will dry. This is because there are fewer water molecules in the air. So, less moisture can be absorbed into your freshly painted surface.

If you live in an area that’s very humid, or you know the weather will be hot and humid for a long period of time after you paint, consider using quick-drying paint.

This type of paint contains chemicals that help it dry faster than regular latex paints do.


If you want to speed up how quickly your new coat of paint dries, use a fan or open windows in the room where you’re painting.

This will help circulate air around your project area. Therefore, moisture can escape more quicker than if it was trapped in stagnant air. Therefore, drying time will decrease significantly!

The texture of your wall

If you’re painting on a textured surface like brick or concrete, it may take longer than usual for your Behr paint to dry. Because these surfaces tend to absorb more moisture from the air than smooth surfaces do. This means that more moisture will be trapped in them as the air evaporates from around the edges of your brush strokes.

How to fast behr paint drying time?


The first step in speeding up the drying time of Behr paint is to make sure that you have a good application method. If you are using a roller or brush, make sure that it is clean and free of debris.

If you are painting a large area, it may be helpful to use two coats of primer before applying your top coat of paint. Using multiple coats will help fill in any areas where there was not enough coverage from the first coat of primer or paint.

If you are painting an interior room, try to keep the humidity level as low as possible during application and drying time. This can be done by turning off appliances such as dishwashers and dryers when not in use. Also, opening windows for cross-ventilation, and keeping doors closed when possible (except for doors leading outdoors).

How do you know when behr paint is fully dry?

There are a few ways to tell when your Behr paint is fully dry.

First, you can use the time-tested method of waiting until you see no more bubbles rising from the surface of the paint. This typically takes 1-2 hours, depending on how thick your layer of paint is.

Second, you can use a moisture meter to measure the moisture in the air around your paint. And, compare it to readings from before you painted. This is a good idea if you want to make sure that there are no drops of moisture lingering in the air. If there are still some drops left over after two hours, it’s likely that your paint won’t be fully dry for another day or two.

Thirdly, you can touch the surface of your freshly painted wall with the back of your hand. If it feels cool and dry, then it’s probably ready for priming or other finishing products!


So, now you know how long it takes for Behr paint to dry!

We hope you found this article helpful! If you have any further questions about how long it takes for Behr paint to dry, please contact us.

Thanks for reading!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *